lQLPJxbXbUXXyc7NAUvNB4CwHjeOvqoGZysDYgWKekAdAA_1920_331

imikhiqizo

Izinqubo zokusika zensimbi ezinembile ezihlanganisa ukusika i-Laser, i-Chemical etching kanye neJet Yamanzi

incazelo emfushane:


  • Ukukhiqiza Ngokwezifiso:
  • Imininingwane Yomkhiqizo

    Omaka bomkhiqizo

    Izinqubo Zokwenziwa Kwezinsimbi Zeshidi: Ukusika, Ukugoba noma Ukubumba, Ukuthepha noma Ukuhuquza, Ukushisela nokuhlanganisa.

    Izinto zensimbi zeshidi ngokuvamile zingamapuleti ensimbi anobukhulu obungu-1220*2440mm, noma amaroli ensimbi anobubanzi obucacisiwe.

    Ngakho-ke ngokwezingxenye zensimbi zangokwezifiso ezihlukene, isinyathelo sokuqala sizosikwa impahla ibe usayizi ofanele noma isikwe ipuleti lonke ngokwephethini eyisicaba.

    Kunezinhlobo ezi-4 eziyinhloko zezindlela zokusika zezingxenye zensimbi:Ukusika i-laser, ijethi yamanzi, iChemical etching, ukusika isitembu ngethuluzi.

    inhlanhla (1)
    inhlanhla (2)

    1.1 Ukusika i-laser

    Ukusika i-laser kuyindlela esetshenziswa kakhulu yokusika insimbi yeshidi, ikakhulukazi yama-prototypes ensimbi enembile kanye nokukhiqizwa kwevolumu ephansi, kanye nokunye okuwugqinsi kweshidi elingahambisani nokusika isitembu.

    Ekukhiqizeni kwethu okujwayelekile, ngaphezu kwe-90% yokusika kwensimbi yeshidi kusetshenziswa ngokusika kwe-laser.Ukusika i-laser kungathola ukubekezelelana okungcono kanye nemiphetho ebushelelezi kunejethi yamanzi.Futhi ukusika kwe-Laser kufanelekile futhi kuguquguqukayo ngezinto eziningi nokushuba kunezinye izindlela.

    I-HY Metals inemishini yokusika ye-laser engu-7 futhi ingasika izinto ezifana nensimbi, i-Aluminium, ithusi, insimbi engagqwali enobubanzi obungu-0.2mm-12mm.

    Futhi singabamba ukubekezelelana kokusika njengo-±0.1mm.(Ngokuvumelana ne-ISO2768-M evamile noma okungcono)

    Kodwa ngezinye izikhathi, ukusika nge-laser nakho kunobubi obuthile njengokushintsha ukushisa kwezinto ezincane, ama-burrs nemiphetho ebukhali yethusi eliwugqinsi kanye nensimbi ye-aluminium ewugqinsi, ehamba kancane futhi ebiza kakhulu kunokusika isitembu ukuze kukhiqizwe ngobuningi.

    inhlanhla (3)
    inhlanhla (4)

    1.2 Ukufakwa kwamakhemikhali

    Ngokuqina kweshidi lensimbi elincanyana kuno-1mm, kukhona enye inketho yokusika ukugwema ukuwohloka kokushisa kwe-laser.

    I-Etching iwuhlobo lwesudi yokusika ebandayo yezingxenye zensimbi ezincanyana ezinezimbobo eziningi noma amaphethini ayinkimbinkimbi noma amaphethini anamathiselwe uhhafu.

    ukukhishwa kwamakhemikhali
    ulala (6)

    1.3 Indiza yamanzi

    Ijethi yamanzi, eyaziwa nangokuthi ukusika amanzi, iwubuchwepheshe bokusika amanzi okucindezela okukhulu.Kungumshini osebenzisa amanzi anomfutho ophezulu ukusika.Ngenxa yezindleko zayo eziphansi, ukusebenza okulula kanye nesivuno esikhulu, ukusika amanzi kancane kancane kuba indlela yokusika eyinhloko ekusikeni kwezimboni, ikakhulukazi ukusika izinto eziwugqinsi.

    Indiza yamanzi ayivamisile ukusetshenziswa ekwenziweni kwensimbi yeshidi lokunemba ngenxa yesivinini sayo esinensayo kanye nokubekezelela okungalungile.

    ulala (7)

    1.4 Ukusika isitembu

    Ukusika isitembu kuyindlela evame ukusetshenziswa kakhulu yokusika ngemva kokusika i-laser, ikakhulukazi ekukhiqizeni ngobuningi nge-QTY engaphezu kwama-pcs ayi-1000.

    Ukusika isitembu kuyindlela engcono kakhulu kwezinye izingxenye zensimbi ezincane ezinama-cuttings amaningi kodwa amanani amakhulu.Inembe kakhulu, iyashesha, ishibhile futhi imiphetho ishelela.

    Ithimba le-HY Metals lizohlala likunikeza indlela engcono kakhulu yokusika efanelekile yamaphrojekthi akho ensimbi ngokwesidingo sakho kuhlanganiswe nolwazi lwethu lomsebenzi.

    ukusika

  • Okwedlule:
  • Olandelayo:

  • Bhala umlayezo wakho lapha futhi usithumelele wona