lQLPJxbXbUXXyc7NAUvNB4CwHjeOvqoGZysDYgWKekAdAA_1920_331

imikhiqizo

Isevisi yokuphrinta ye-3D yezingxenye ezisheshayo ze-prototype

incazelo emfushane:

Ukuphrinta kwe-3D (3DP) kuwuhlobo lobuchwepheshe be-prototyping obusheshayo, obubizwa nangokuthi ukukhiqiza okungeziwe.Kuyifayela eliyimodeli yedijithali elisekelwe, kusetshenziswa insimbi eyimpuphu noma ipulasitiki nezinye izinto zokunamathisela, ngokuphrinta ungqimba nongqimba ukuze kwakhiwe.

Ngokuthuthuka okuqhubekayo kokuthuthukiswa kwezimboni, izinqubo zokukhiqiza zendabuko azikwazanga ukuhlangabezana nokucutshungulwa kwezingxenye zesimanje zezimboni, ikakhulukazi ezinye izakhiwo ezimise okukhethekile, okunzima ukuzikhiqiza noma okungenakwenzeka ukuzikhiqiza ngezinqubo zendabuko.Ubuchwepheshe bokuphrinta be-3D benza konke kwenzeke.


  • Ukukhiqiza Ngokwezifiso:
  • Imininingwane Yomkhiqizo

    Omaka bomkhiqizo

    i-aubd (1)

    Izinzuzo zokuphrinta kwe-3D?

    ● Ukulethwa okusheshayo kakhulu, izinsuku ezingu-2-3 kungenzeka
    ● Kushibhe kakhulu kunenqubo yendabuko.
    ● Ubuchwepheshe bokuphrinta be-3D bugqekeza ubuchwepheshe bokukhiqiza obujwayelekile.Konke kungenzeka ukuthi kuphrintwe.
    ● Ukunyathelisa sekukonke, akukho ukuhlanganisa, konga isikhathi nemisebenzi.
    ● Ukuhlukahluka kwemikhiqizo akuzinyusi izindleko.
    ● Ukuncipha kokuthembela kumakhono okwenziwa.
    ● Inhlanganisela yezinto engapheli.
    ● Akukho ukumosha izinto zomsila.

    Izindlela ezijwayelekile zokuphrinta ze-3D:

    1. FDM: Ncibilikisa idiphozi yokubumba, into esemqoka yi-ABS

    2. I-SLA: Ukukhanya okuphulukisa ukubumba okubolile, into eyinhloko i-photosensitive resin

    3. I-DLP: I-Digital light processing molding, into eyinhloko i-photosensitive resin

    Isimiso sokwakhiwa kobuchwepheshe be-SLA ne-DLP siyefana.Ubuchwepheshe be-SLA busebenzisa i-laser polarization scanning point irradiation point, futhi i-DLP isebenzisa ubuchwepheshe bokuqagela kwedijithali ukuphulukisa okugqinsiwe.Ukunemba nesivinini sokuphrinta se-DLP singcono kunokuhlelwa kwe-SLA.

    i-aubd (2)
    isiqephu (3)

    Yiziphi izinhlobo zokuphrinta ze-3D ezingaphathwa yi-HY Metals?

    I-FDM ne-SLA yizona ezisetshenziswa kakhulu ku-HY Metals.

    Futhi izinto ezisetshenziswa kakhulu yi-ABS ne-photosensitive resin.

    Ukuphrinta kwe-3D ishibhile kakhulu futhi kuyashesha kunomshini we-CNC noma ukukhishwa kwe-vaccum lapho i-QTY iphansi njengamasethi angu-1-10, ikakhulukazi ezakhiweni eziyinkimbinkimbi.

    Nokho, ilinganiselwe ngezinto ezinyathelisiwe.Singaphrinta izingxenye zepulasitiki kuphela futhi sinciphise izingxenye zensimbi ukuze.Futhi, ubuso bezingxenye eziphrintiwe abushelelezi njengezingxenye zomshini.


  • Okwedlule:
  • Olandelayo:

  • Bhala umlayezo wakho lapha futhi usithumelele wona